If you are shopping for a pear-shaped diamond engagement ring, this article was written with you in mind. The pear-shaped design is very popular and if you have your heart set on acquiring this design, there are a few things to consider. The pear-shaped diamond ring is a cross between the round and the marquee cut, with a curved end and a slightly pointed end that gives it that distinctive pear shape, and this shape has been popular for at least 500 years. Also known as tear-shaped, this design has a timeless appeal and for many women, is the choice for an engagement ring.

The Pear Cut

The pear cut has 58 facets, as does the brilliant round cut, and due to the large amount of light that surrounds the stone, the pear shape gives off a brilliant sparkle. This is just one reason why this shape is so popular and if you are looking to purchase diamond jewellery men get for their girlfriends, there are online jewellers with a wide range of pear-shaped diamond engagement rings.

Look For Perfect Symmetry

Symmetry is essential with a pear-shaped design, and divided down the centre, the left side should be a mirror image of the right. The point of the tip should perfectly align with the curved end tip, and by looking for a Very Good or Excellent symmetry, you can’t go wrong. There are articles you can find online for some further reading on what to look for when buying a pear-shaped diamond engagement ring.

Length To Width Ratio

This ultimately dictates the shape, with the ideal ratio being anything from 1.5 to 1.75, while less than 1.5 looks too flat and anything over 1.75 is too elongated. It really does come down to personal preference and if you are happy with a slightly longer design, why not?

Watch Out For The Bow Tie

A bow tie is caused by incorrectly cut facets where the light is not reflected back from the surface and therefore, causes a shadow which is known in the industry as a bow tie. This flaw can vary from being very noticeable to difficult to see, but either way, take a good look for shadows on any surface, which takes away some of the sparkle.

Choosing The Setting

The stones must be both protected and held in place, and there are several setting designs that specifically protect the tip of the diamond, which could easily catch on fabric. A six-prong setting is popular with pear-shaped rings, as it allows light to hit the stone surfaces, with 5 prongs holding the diamond, while the 6th protects the diamond tip. The halo setting is another good choice for a pear-shaped ring, as this allows maximum light to reflect, adding to the sparkle.

There are many ring styles that complement the pear cut diamond – solitaire being the most popular – and by searching online for a reputable local jeweller, you can view many fine examples before making your final selection, and with a secure online payment, the ring will be on its way to your home address.